Slope greening spraying machineIt is a professional equipment applied to soil spraying. Through this equipment, soil substrates, grass seeds, water retaining agents, binders, fertilizers, etc. are sprayed onto the slope. Because the slurry contains water, adhesives, various nutrients and other nutrients, while ensuring the water and other nutrients needed for plant growth, it can effectively prevent the damage of rainwater to the spraying materials, so that the plants can grow healthily and quickly.

According to the different spraying materials, there are roughly three types of spraying machines: ground spraying machine, high-order aggregate spraying machine, and hydraulic spraying machine (grass seed spraying machine or grass seed spraying machine). The performance, materials and uses of the three kinds of spraying machines are different. Its different types of jet machine price difference is also relatively large.

The mixing high-order aggregate spraying machine is a special equipment for high-order aggregate spraying. Through this equipment, the soil matrix, polymer A and B materials, green grass seeds, water retaining agent, adhesive, fertilizer, etc. are mixed with water in the aggregate spraying machine tank to form a colloidal slurry, and the slurry pump is used to spray it on the slope surface. Because the slurry contains water, adhesives, various nutrients and other nutrients, while ensuring the water and other nutrients needed for plant growth, it can effectively prevent the damage of rainwater to the spraying materials, so that the plants can grow healthily and quickly. The pellet type spraying machine is mainly used for high and steep slope restoration, mine greening, pure rock slope and other high and steep slopes.

How to plant grass on the slope:

It is 1. to clean the slope surface. Generally, pneumatic picks, steel drys and other tools are used to clean the gravel, pumice, dangerous rock and slope surface of the slope surface. Manual treatment will bring great trouble to the anchor rod and the hanging net (if it is not flat, it will bring great trouble to the anchor rod and the hanging net).

Anchor rods should be used 2.. When selecting anchor rods, note that the length of anchor rods is about 1-2 m. Its main function is to fix the slope at two points and hang the net conveniently. If the slope is too steep, hang the crosswood.

3.-hanging mesh, barbed wire or three-dimensional mesh). When constructing the slope drainage ditch, the drainage net shall be pressed under the drainage ditch to prevent landslide and theft; the top of the hanging net shall be kept at 20-750 px, and the bottom shall be kept at 500 px. The pressure of the net and the net shall overlap by 1-2cm and be fixed with U-shaped nails or iron wires;

Spray the mixture 4. the substrate. Using a jet seeder, the substrate mixture was sprayed onto an inclined plane. Try to spray from the front, press from top to bottom, from left to right, avoid upward spraying, pay attention to no leakage, no dead corners. Then, mix the planted soil, pulp or wood fiber, water retaining agent, adhesive and grass seeds evenly and spray them on the slope with a thickness of about 0.5-25 px.

The non-woven fabric made of 5. spray and high polymer covers the slope from top to bottom, which is good for moisture retention and erosion resistance. Non-woven density requirements 15-18g/m2.

Maintenance and management of 6.: mainly sprinkler irrigation, irrigation, fertilization and pest control.

Water is 7. to water the slope according to the humidity and weather conditions. It is usually watered twice a day to promote seed germination and whole seedlings. After the seedling period is over, water can be poured once a day.

10-20 days after the 8. slope greening spraying machine spraying, after the slope plants grow out, if there is no non-woven slope non-woven fabric, uncover the non-woven fabric manually to facilitate the growth of plants.