Home page

Products

(Wechat/Whatsapp/Skype)

Address: Sany Supporting Industrial Park, Economic and Technological Development Zone, Loudi City, Hunan Province

30E Robotic Wet-Spraying Trolley

1. The equipment features a simple structure and strong adaptability. 2. It delivers high pumping pressure and enables long-distance conveying. 3. High efficiency: large delivery capacity and superior overall productivity. 4. Superior performance: the sprayed concrete exhibits excellent density, uniformity, and high strength. 5. High reliability: key components are sourced from well-known domestic brands, ensuring dependable operation. 6. Accelerator addition and control technology: a renowned pneumatic metering pump is employed for precise dosing; atomized spray streams mix uniformly with the concrete flow at the nozzle, ensuring thorough blending of the accelerator. 7. Dust concentrations near the machine and outside the nozzle are significantly reduced, eliminating health hazards to workers. 8. Low rebound rate: in dry spraying, concrete rebound can reach 15%–50%; by contrast, wet spraying reduces the rebound rate to below 10%, resulting in substantial cost savings. 9. Hydraulic oil is cooled using an air‑cooling system, which is both simple and environmentally friendly.

Classification:

Concrete Equipment Series

Key words:

Product inquiry

Accessories Center

Product Details

Product Introduction

1. The equipment has a simple structure and strong adaptability.

2. High pumping pressure and long delivery distance.

3. High efficiency: large conveying capacity and high overall productivity.

4. High Performance: Shotcrete exhibits excellent performance, characterized by high density, uniformity, and superior strength.

5. High Reliability: Key components are sourced from well-known domestic brands to ensure the equipment’s high reliability.

6. Accelerator Addition and Control Technology: A well-known pneumatic metering pump is employed, ensuring precise dosing. The atomized spray stream mixes with the nozzle’s material flow, achieving uniform dispersion of the accelerator throughout the concrete.

7. It reduces dust concentrations both at the machine side and outside the nozzle, thereby eliminating health hazards to workers.

8. Low rebound rate. During dry spraying, the concrete rebound rate can reach 15%–50%; by contrast, wet spraying can reduce the rebound rate to below 10%, resulting in significant cost savings.

9. Hydraulic oil is cooled using air cooling, which is simple and environmentally friendly.

Product Features

Product Specifications

Product Name	Product model	Product Abbreviation
Robotic wet-spraying trolley	SRSP40K	C40
System parameters
1	Overall dimensions (mm)	8800×2640×3300
2	Rated weight	Approximately 17.5 TB
3	Maximum working height (m)	16
4	Maximum working width (m)	20
5	Maximum operating depth (m)	5.05
6	Minimum tunnel width × height (m)	≥5m×7m
Boom parameters
1	Boom structure type	The upper arm and forearm can pitch, and the forearm features a two-section telescoping mechanism.
2	Control mode	Electrical proportion
3	Arm swing angle (°)	270 ~ 300
4	Arm pitch (°)	0 ~ 70
5	Elbow pitch (°)	Relative to the upper arm: 0 ~ -110
6	Arm extension/retraction (m)	2300×2
7	Nozzle axial rotation (°)	360°
8	Nozzle axial swing (°)	240 °
9	Nozzle auxiliary motion (°)	360°
10	Control mode	Fully remote-controlled
11	Work-driven approach	Chassis engine or three-phase induction motor
Pumping parameters
1	Work-driven approach	Chassis engine or three-phase induction motor
2	Rated power of the electric motor	75KW
3	Motor operating voltage	380V
4	Hopper capacity	0.65 m³
5	Concrete displacement	40 m³/h
6	Pumping package	Full coverage
7	Delivery cylinder bore × stroke	Φ180×1170mm
8	Main cylinder bore × stroke	Φ100×Φ70×1000mm
9	Maximum system pressure	28Mpa
10	Concrete outlet pressure	8.6Mpa
11	Maximum aggregate size of concrete (mm)	≤16
12	Feeding height (mm)	≤1500
13	Maximum theoretical displacement of the accelerating agent pump	Variable-frequency control, 0.3 L/r; higher rotational speed yields greater flow rate.
14	Maximum outlet pressure of the accelerating agent pump	1.6Mpa
15	Conveying pipe diameter	Φ125–Φ100, Φ100–Φ90 mm reducer
16	Nozzle orifice diameter	Φ50mm
Chassis Parameters
1	Drive type	Four-wheel drive
2	Engine power	103Kw
3	Wheelbase	4100mm
4	Front axle track (center of wheel width)	1890mm
5	Rear axle track (center of wheel width)	1890mm
6	Tire	16/70-20 16PR L56 Pneumatic Tire
7	Front/Rear Axle Load	11T/11T
8	Maximum speed	20km/h
9	Maximum gradeability	25°
10	Minimum turning radius	10m
Auxiliary Component Parameters
1	Air compressor	90KW 15.6 m ³/min
2	Air compressor (high-altitude version, optional)	110 kW 19.6 m ³/min