Application of concrete wet spraying machine

With the rapid development of underground space such as railway tunnels, highway tunnels, urban subway tunnels and mining resources, the requirements of construction technology, tunnel engineering quality, operation safety and occupational health are constantly improving, and the application of tunnel concrete wet spraying machine is more and more extensive. The basic principle of the concrete wet spraying machine is to send the mixed concrete into the concrete wet spraying machine, and mix the compressed air with the atomized accelerator from the metering pump to the nozzle at the nozzle to form a material beam and spray it on the sprayed surface. Staffing and Requirements At least three workers are required in the construction of the equipment, one is responsible for shotcreting operation, one is responsible for discharging the mixing truck, and one is responsible for checking the equipment and other auxiliary work. Ensure that the concrete mix ratio of the construction party meets the equipment requirements. The concrete pump is used as the power source for pushing concrete, so the mix ratio of concrete must meet the requirements of pumping concrete. The voltage at the construction site shall meet the requirements. Generally, the voltage fluctuation range is less than 10% of the electrical calibration requirement. If the voltage is too low, the current will be too large and overloaded, the electrical system will not be able to start, and the motor will be burned out.

24

2022

/

03

< 1...789...19 > proceed page